All of our High-Z Model CNC router / routers provide some of the highest torque ratings in the industry. Our systems feature three High-Torque Stepping motor…
I use machining methood “jam in-between centres”, so in this way I NOT lose my work time for next workpiece to set in lathe chuck jaw’s. Calliper I use for workpiece accurate control only, because I special to regulate my machine for this job. Speed=630RPM, feed=0,13mm/rpm depth of cut (“chip”)=1mm
Video Rating: 5 / 5
To apply for this position: bit.ly We are currently looking for multiple CNC Set-Up Machinists in the Greater Boston area. CNC Set-up Machinists will: • Set-up & operate CNC Machines (Milling or Lathe or Swiss Screw) • Select tooling & fixtures according to specifications • Read & interpret engineering instructions & blue prints Machinist candidates must: • Be familiar with geometric dimensions & tolerances • Be knowledgeable of 1st piece, in-process and final inspection • Incoming inspection of material experience is a plus • Be able to use & interpret precision measuring devices (micrometers, vernieres, hand tools & gages). • Have knowledge of G-code programming & editing and MasterCAM software is a plus • 2 to 5 years experience desired • Be able to work independently and with others
Just some job i did on the cnc lathe. I chucked a small 3 jaw into a large 4 jaw and indicated in.
Video Rating: 0 / 5
Haas Automation, Inc. donated a CNC lathe to Dunwoody earlier this year. Here’s a quick look at it in action with help from Machining Technology Senior Instructor Brian Nelsen and one of his students (who preferred to remain anonymous). Please note that the shield was left open in order to capture a better view. That’s not standard operating procedure. We don’t recommend running a CNC lathe like that for normal use. And anytime you are doing machining work — wear safety glasses.
Running my little production job on the old Paxton/Patterson and my new Emco.
My Job. The video is a crappy cell phone video. This is a fully automated cell producing the Ford Super Duty EGR valve. A Mori NL1500 lathe with live tooling and a Mori NH5000 pallet changing horizontal mill. The 360 alloy casting has two stainless steel valve seats cast directly into the part. This part took first place in the NADCA casting “under one pound” category. The Cell is worth about a million bucks.
Okuma LNC-8 CNC Latheunder power & FOR SALE @ Rohner Machinery Sales At Rohner Machinery, we pride ourselves in giving the customer top quality new and pre-owned machines for every application. Located in Fullerton, California, Rohner Machinery is a full service machine tool distributor & rebuilder ready to meet any of your needs. We carry a wide variety of equipment from top quality high precision CNC jig borers to conventional mills and lathes. To ensure the quality of our equipment, all of our machines go through a thorough inspection process. We are also a full service rebuilding and repair shop and can handle most any rebuild or repair job. Finally, all of our machines are guaranteed with a return policy to ensure the customer will be satisfied. Call us toll free @ 888-440-4460 Visit us @ www.rohnermachinery.com Or go directly to our Ebay store where all our inventory is listed @ http Sincerely, Rohner Machinery Sales, Inc. 2430 Cypress Wy. Fullerton, CA 92831 Tel: 714-441-1527 Fax:714-441-1557 Email: firstname.lastname@example.org
Actual Machining time: 40 minutes + 10 minutes polishing. No ball screws! Automate your lathe today with Putnam Engineering!
Video Rating: 4 / 5