Wood processing CNC router, 4 axes – first test

This is the first test of Strasmax / Wood Masters new wood processing CNC router, that will have, when finished, 4 axes. In this video, just Y and Z axes are working, X double screw axis is not configured yet. The characteristics of the router are as follows: – 2100x1100x300 mm (active); – Ballscrew Ø25 x 10 (x2) on X; Ø25×5 on Y; Ø16×5 on Z. – Ø25 supported linear guides on X and Y, Ø30 un-supported linear guides on Z, all with linear bearings. – Structure: aluminium profile 90×90 mm, heavy; Steel tube 80x80x4 support frame, with castors and equalization screws; – Stepper motors Nema 34, 12Nm; – Suhner 1050W spindle with ATC; – Kinko 2M2280 stepper drivers.
Video Rating: 5 / 5