Warthog cnc router
This is an sx 100 4×8 Warthog CNC router. 6.1 hp SEV (hsd) high frequency spindle, 15 hp FPZ vacuum pump, wincnc controller with Dell PC, tool holders and collets, manuals, wrenches, 3hp grizzly dust collection,230 v 3-phase zoned vacuum table. We upgraded to an Omnitech 5×10 .The warthog was used very little for around 8 months for nested base cabinet manufacturing.
Video Rating: 0 / 5
Craftsman QuickRout ATC Test
Teasing the feasability of using the craftsman quickroute as an automatic tool changer for a CNC machine. The attempt was made and my conclusion at this time is that its unreliable. Although it works great swapping out bits manually which is the way I’ll be using it…
Video Rating: 5 / 5
Thermwood – Assembly Marks for Cabinets/Furniture
This video demonstrates Thermwood’s patent pending Assembly Marks. The parts are machined and assembly marks are machined either in blind dados or full dados. The marks allow for quicker assembly. www.thermwood.com
Video Rating: 5 / 5
old zenbot mini cnc router www.zenbotcnc.com
This cnc router model has been replaced by a new, and much improved version. www.zenbotcnc.com
Making a CNC Router Part 1: Assembing CNC
Well I just turned 17 years old today, February 23, 2011, and I have always wanted to make a CNC router. So for my birthday, I asked my dad to get me a CNC hardware and plans kit from www.buildyourcnc.com. Then I went to Lowes and the Home Depot to get a sheet of MDF, aluminum angles, threaded rods, and various other items I needed to make the machine. So the whole weekend last week, I’ve been working on cutting all the parts I need and then drilling all the holes in the pieces. Here is my progress so far. Now I just need to get the electronics for it. To see more on this project go to: kyleswoodworking.webs.com
Video Rating: 5 / 5
Techniks toolholders for CNC machining centers. www.techniksusa.com ER collet chucks, end mill holders, boring tools, er collets, TG collets, rotary tooling, Dual contact toolholders, shrink fit tooling, CAT40, CAT50, BT30, BT40, ISO30, ISO20, HSK63F, HSK63A, slim fit toolholders, collets and nuts, DA collets, CNC router toolholders, aggregate heads, boring kit, finish heads, rough heads, boring bars, cnc tooling and accessories (800) 597-3921
Flexicam CNC Router for sale by Carolina Machinery Sales
Good looking machine that has been used to run mainly PVC. Specs and photos available at www.carolinamachinerysales.com
Video Rating: 0 / 5
Tabbing With the Shopbot
A few years old and runs a bit fast. This demonstrates the tabbing function, which leaves parts attached to the sheet. This is the old version of the software.
Video Rating: 0 / 5
Brett Dickerson has added a Shopbot to his classroom and has found his Technology and Engineering program tranformed. Brett Teaches in Brownsville TX.
Video Rating: 3 / 5