Comments for CNC Router Info http://cncinformation.com/CNC-Router Great Information and Videos on CNC Routers Mon, 20 May 2013 23:59:57 +0000 hourly 1 http://wordpress.org/?v=275 Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by radioshack7 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3672 radioshack7 Mon, 20 May 2013 23:59:57 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3672 Very nice work!

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by simplycnc http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3671 simplycnc Mon, 20 May 2013 23:43:44 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3671 very nice machine,looks the part..

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Allan Trudgeon http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3670 Allan Trudgeon Mon, 20 May 2013 22:52:04 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3670 VERY nice build!! Makes my MDF creation look slow and amateur :-) Well Done!

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3669 Morten Lundt Mon, 20 May 2013 21:57:58 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3669 @Rogerquin, I had all the sheet metal parts laser cut in 3mm alu, then bended, and only a few parts welded, almost everything is bolted together.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3668 Morten Lundt Mon, 20 May 2013 21:45:17 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3668 @TrudgeRC, Thank you, but there are many fine mdf machines, many of those gave me the interest to make mine.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3667 Morten Lundt Mon, 20 May 2013 21:25:08 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3667 @Rogerquin, yes this is my first build:-)

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Ahmet Saykal http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3666 Ahmet Saykal Mon, 20 May 2013 21:17:38 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3666 Very very speedy

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by mbr72cnc http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3665 mbr72cnc Mon, 20 May 2013 20:44:42 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3665 Very well done you should be proud

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by alswift1 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3664 alswift1 Mon, 20 May 2013 19:47:27 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3664 Very Tidy design, your are a clever man.
What size belts are you using on x and y?
what size on Z? Why did you use timing belt on Z whwn a lot of people use a ball screw ?
Fantastic allround
Al

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3663 Morten Lundt Mon, 20 May 2013 19:04:11 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3663 ,Thanks, on all axis between the stepmotor and output axle I use belt type M5-9, from the output axle I use M5-15 but on the X axis I have 2 belts – one on each side. I have access to a lot of different materials, belts pulleys… but no ball screws, I figured it would be good enough with belts so I went that way. This is my first build, but if I should build a secound one I would go for profile rails instead of round rails, and ball screws instead of belts. Regards Morten

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by bmillmine http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3662 bmillmine Mon, 20 May 2013 18:09:15 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3662 blazing fast. you rock!

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by alswift1 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3661 alswift1 Mon, 20 May 2013 17:35:20 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3661 Is the diameter /number of teeth of the pulley wheels on the x and y axis important? (not the reduction units)

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3660 Morten Lundt Mon, 20 May 2013 17:01:23 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3660 Not that important you will just have another ratio between motor rpm / axis movement. I have 16t on the motors going to a 72t and outputs to 18t on all axis, with a full step that gives in teory 0,1mm ( but in practice it’s a little more because you stretch the belt to the axis). My motors have full torque up to 500rpm, so I am able to go about 10000mm/min at 500rpm, and I was lucky it worked wery well. I think it’s important that the x & y axis have the same reduction.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3659 Morten Lundt Mon, 20 May 2013 16:35:25 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3659 Thanks.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by evaj0933 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3658 evaj0933 Mon, 20 May 2013 16:03:08 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3658 Very Nice build

Can you tell me how you tighten the belts or are they made to fit?

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3657 Morten Lundt Mon, 20 May 2013 15:25:04 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3657 Hi, the stepmotors have long holes so I can tighten them by pulling them away from the reduction axle, the belts for the axis I can tighten the freepulleys, they need to be rather tight to eliminate backlash. I will try to do another video to show more details.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by jerry coleman http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3656 jerry coleman Mon, 20 May 2013 14:51:42 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3656 Very nice where do you get the belts and pulleys ?

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by jerry coleman http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3655 jerry coleman Mon, 20 May 2013 14:09:47 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3655 Hello again i have a cnc with similar steppers i drive threaded rod directly mine is insufferably slow i think im going to go with a belt drive system like yours whats the cost per axis for the needed pulleys & belts
Fantastic job by the way
Maybe show a screen grab of your settings and the ports and pin setup from mach 3

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3654 Morten Lundt Mon, 20 May 2013 13:11:36 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3654 Thanks, the pulleys and belts are from optibelt.com, but look on ebay there are many cheap pulleys and belts there instead.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3653 Morten Lundt Mon, 20 May 2013 12:50:45 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3653 Thanks again, belts are ok, but I would go for ballscrews if I should build another one, but depends what you use it for. I will do another video soon, and will try to show the settings there. It can go alot faster but this is ok, the importing thing is the acceleration, so you can keep your feedrate when changing directions, there are alot videos here on youtube where the machines can go very fast, but the acceleration takes allmost the working lenght of the table to get there, thats no good.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by jerry coleman http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3652 jerry coleman Mon, 20 May 2013 12:50:38 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3652 Thanks for the reply my cnc has threaded rod 1/2 20 on the x and 1/4 20 on the z and y
It is spot on most of the time but i have lost a few steps along the way i have it set to 4000 /30/4 seems ok its a tiny bit less on the x axis after calibration x is my long axis cant wait to see your next video very well done vid btw
I hope to post a few cnc vids my self soon

Jerry

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by NuttyforNissan http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3651 NuttyforNissan Mon, 20 May 2013 11:51:39 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3651 Nice machine very neat the holes in the frame are very good also. :)

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by curlycz http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3650 curlycz Mon, 20 May 2013 10:52:11 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3650 Hello! Very nice design. I would like to know what is thickness of your steel plates used on your machine.

Thank you!

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by Morten Lundt http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3649 Morten Lundt Mon, 20 May 2013 10:10:57 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3649 I used 3mm alu sheetmetal for everything.

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by saad bouta http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3648 saad bouta Mon, 20 May 2013 09:58:07 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3648 Nice machine thank you 

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by DreyDreyDrey3 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3647 DreyDreyDrey3 Mon, 20 May 2013 09:16:28 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3647 What is the name of the artist and song for the video?

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by DreyDreyDrey3 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3646 DreyDreyDrey3 Mon, 20 May 2013 08:48:51 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3646 Test

]]> Comment on Solid Carbide Insert ‘V’ Groove Router Bits by Amana Tool Used in CNC to Create Signs by DreyDreyDrey3 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/comment-page-1/#comment-3645 DreyDreyDrey3 Mon, 20 May 2013 08:04:52 +0000 http://cncinformation.com/CNC-Router/solid-carbide-insert-v-groove-router-bits-by-amana-tool-used-in-cnc-to-create-signs/#comment-3645 What is the name of the song and artist from the video?

]]> Comment on CNC Router Y axis 2 ballscrew the best machine by tatix1274 http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/comment-page-1/#comment-3644 tatix1274 Sun, 19 May 2013 00:41:52 +0000 http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/#comment-3644 Hi, i´m from Peru and i´m doing a project about ur robot, which is very interesting how u made it…my project is not about how to make it is more about how it works…can you give me more information about it please?

]]> Comment on CNC Router Y axis 2 ballscrew the best machine by Neal Rosenblum http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/comment-page-1/#comment-3643 Neal Rosenblum Sun, 19 May 2013 00:27:24 +0000 http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/#comment-3643 Dear Euler357,
I am getting ready to fabricate my first CNC router. Out of all of the routers that I have seen, your design is by far the best. It looks simple and very robust.
How do you attach the sleeve bearings for the x-axis? I looked at your Solidworks files and the bearing just appear to be pressed into a bore in the wood.

]]> Comment on CNC Router Y axis 2 ballscrew the best machine by euler357 http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/comment-page-1/#comment-3642 euler357 Sat, 18 May 2013 23:52:47 +0000 http://cncinformation.com/CNC-Router/cnc-router-y-axis-2-ballscrew-the-best-machine/#comment-3642 It is an interference fit (pressed in).

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by frenchfranaout http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3641 frenchfranaout Sat, 18 May 2013 01:38:12 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3641 Merci pour cette excellente vidéo. Je ne me lasse pas de revoir ces moments… J’étais à Grenoble quelques jours plus tard et serai à Lyon le 6 novembre.

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by Baptiste Schicklin http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3640 Baptiste Schicklin Sat, 18 May 2013 00:41:27 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3640 slt,super multicam!!!!comment as-tu eu ta bande son derriere?

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by TheDorge88 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3639 TheDorge88 Fri, 17 May 2013 23:48:55 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3639 Magique , Merciiii

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3638 familyname1402 Fri, 17 May 2013 23:13:35 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3638 ;) dommage, youtube a altéré la qualité de ce que j’avais envoyé à la base… compression bizarre, mais bon…

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3637 familyname1402 Fri, 17 May 2013 23:09:21 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3637 j’ai remixé d’après plusieurs bandes… ;) merci, content que ça vous plaise !


]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3636 familyname1402 Fri, 17 May 2013 22:45:14 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3636 ça me fait plaisir que vous ayez apprécié et que vous ayez retrouvé un peu l’ambiance de la tournée ! Bon Black City Tour ! N’hésitez pas à partager le lien en attendant les parties 2 et 3 ! ;)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by TheDorge88 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3635 TheDorge88 Fri, 17 May 2013 22:02:07 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3635 c’est top si vous pouvez faire partie 2/3 3/3 4/3
N’hésitez pas vous etes un pro et nous les fans on est preneur

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3634 familyname1402 Fri, 17 May 2013 21:11:34 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3634 J’ai déjà commencé la suite… (partie 4 sur 3 ? lol) Mais j’attends de voir le nombre de vues sur cette première partie pour m’y atteler vraiment… une motivation comme une autre ! Je pense que je mettrai la partie 2 d’ici une dizaine de jours… Et il faut que je résolve ce souci de qualité entre ce que j’ai réellement et ce que youtube diffuse…. :) merci pour vos encouragements !

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by musicseb54 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3633 musicseb54 Fri, 17 May 2013 20:13:12 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3633 Je t’encourage vraiment à faire la suite ! C’est surkiffant cette vidéo :D

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3632 familyname1402 Fri, 17 May 2013 20:00:24 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3632 Merci pour vos encouragements ! :) Je travaille dessus en ce moment…

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by Emilie Koudlansky http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3631 Emilie Koudlansky Fri, 17 May 2013 19:03:13 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3631 tu recherche encore des videos? j’en ai des superbe et du preier rang en plus si jamais ;) Sinon merci de nous faire revivre ça ♥

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by roxanne fanindo http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3630 roxanne fanindo Fri, 17 May 2013 18:49:48 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3630 oui j’irais les voir à amneville mais seulement en octobre,trop trop long :(

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3629 familyname1402 Fri, 17 May 2013 18:36:50 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3629 Merci Emilie, je vous ai envoyé un mail, n’hésitez pas à me faire parvenir vos vidéos, je suis sur la partie 2, j’aimerai la proposer cette semaine au vue des encouragements des uns et des autres ! :)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3628 familyname1402 Fri, 17 May 2013 18:30:17 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3628 En octobre ? De quoi patienter avant le Stade de France de l’année prochaine ! ;) bon second concert !

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by comateen283 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3627 comateen283 Fri, 17 May 2013 18:24:01 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3627 Merci pour ce super montage!! Il nous permet de nous replonger dans cette ambiance géniale des concerts d’Indochine….et de patienter jusqu’au prochain!! Amnéville pour moi…puis Stade de France ! yeeeees
Bonne continuation!!
Je partage sur mon blog!! car ça mérite d’être vu ! :-D

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by Anthony Jacquot http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3626 Anthony Jacquot Fri, 17 May 2013 18:23:02 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3626 J’ai prévu de le faire aussi :)  mais tu était plus vite que moi bravo en tout cas :)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3625 familyname1402 Fri, 17 May 2013 17:48:43 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3625 ;) merci ! j’ai bientôt fini la partie 2… Juste pour creuser l’écart ! lol

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3624 familyname1402 Fri, 17 May 2013 17:37:53 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3624 Merci pour le partage… La partie 2 cette semaine, de Little Dolls à Alice & June… Je reste surpris qu’il y ait autant de gens qui filment dans la salle et si peu de vidéos en HD sur youtube…. Mais j’arrive à combler les trous ! ;)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by June664 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3623 June664 Fri, 17 May 2013 17:03:02 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3623 C’est du super boulot, merci beaucoup :) )!

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by June664 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3622 June664 Fri, 17 May 2013 16:26:44 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3622 C’est drôle d’entendre les fans qui chantent parfois ^^

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by familyname1402 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3621 familyname1402 Fri, 17 May 2013 15:40:13 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3621 Merci, je suis content que ça vous plaise ! :) Vous étiez sur cette date ?
J’ai mis la seconde partie sur youtube hier, j’espère que vous l’apprécierez tout autant ! :)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by June664 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3620 June664 Fri, 17 May 2013 15:13:35 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3620 Oui je l’ai vue aussi, c’est super :) ! Oui j’étais à ce concert, mais je n’ai pas fait de vidéo (je dois avouer que ça m’ennuie un peu quand des gens font des vidéos devant moi donc je n’en fait pas pour ceux derrière, mais après je suis quand même bien contente de retrouver les vidéos sur Youtube ^^)

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by nico memoria http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3619 nico memoria Fri, 17 May 2013 14:48:49 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3619 Franchement merci beaucoup pour un si beau travail. Et merci énormément pour le partage, c’est vraiment cool pour ceux qui n’ont pas vu voir le BCT1 !

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by tom truillet http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3618 tom truillet Fri, 17 May 2013 14:31:02 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3618 magnifique vraiment super franchement j’aimerez aller les vois pour leur derniere tourée le 27/06/2014

]]> Comment on Indochine – Zénith de Nancy, le 21 février 2013 – partie 1/3 – multicam by Laetitia Dez http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/comment-page-1/#comment-3617 Laetitia Dez Fri, 17 May 2013 14:14:13 +0000 http://cncinformation.com/CNC-Router/indochine-zenith-de-nancy-le-21-fevrier-2013-partie-13-multicam/#comment-3617 merci!!jy été et je serais aussi au galaxie en octobre;)

]]> Comment on Homemade 5 axis CNC by andr6669 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3616 andr6669 Thu, 16 May 2013 16:56:36 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3616 nice machine ! can you contact me for the plans ? Thank you

]]> Comment on Homemade 5 axis CNC by naursb http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3615 naursb Thu, 16 May 2013 16:20:00 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3615 Really great! Can you contact me for the plans?

]]> Comment on Homemade 5 axis CNC by RealStuff001 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3614 RealStuff001 Thu, 16 May 2013 15:48:51 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3614 Hi, I am also interested in plans and software details.
Cheers

]]> Comment on Homemade 5 axis CNC by Mark Kotyk http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3613 Mark Kotyk Thu, 16 May 2013 15:09:51 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3613 Awesome. I see some custom etched circuit boards. You should sell the machine to the ski hills to make fake snow in summer.

What type of spindle?

]]> Comment on Homemade 5 axis CNC by rambus27 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3612 rambus27 Thu, 16 May 2013 14:21:44 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3612 ELTE

]]> Comment on Homemade 5 axis CNC by rhadiem http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3611 rhadiem Thu, 16 May 2013 13:56:53 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3611 to do hard materials, it would have to be really really rigid, and probably much more expensive. It’s very cool for what it does though.

]]> Comment on Homemade 5 axis CNC by voarteatrodebonecos http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3610 voarteatrodebonecos Thu, 16 May 2013 13:13:23 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3610 Essa maquina poderia esculpir uma mascara tamanho 400×600 mm e isopor?

]]> Comment on Homemade 5 axis CNC by nash2706 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3609 nash2706 Thu, 16 May 2013 13:08:27 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3609 Yes,me too,i would like to buy the plans. Thanks

]]> Comment on Homemade 5 axis CNC by NWBackcountry http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3608 NWBackcountry Thu, 16 May 2013 13:08:17 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3608 You are my hero. I would love to know how to make this machine. Where should I start?

]]> Comment on Homemade 5 axis CNC by heiken01 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3607 heiken01 Thu, 16 May 2013 12:54:30 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3607 Hi! what kind of foam would you use to get the smoothest surface? I’m insterest in the plans too!

]]> Comment on Homemade 5 axis CNC by Roderick Oh http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3606 Roderick Oh Thu, 16 May 2013 12:11:52 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3606 can I also get the plans for this machine thanks

]]> Comment on Homemade 5 axis CNC by PilatusPorterPC6 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3605 PilatusPorterPC6 Thu, 16 May 2013 11:43:53 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3605 Nice! That’s a big freakin machine: )

]]> Comment on Homemade 5 axis CNC by 313machine http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3604 313machine Thu, 16 May 2013 11:35:16 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3604 Hello Rambus. Very nice work! Can you sent me information for plans on the machine.
Thank you
Steve

]]> Comment on Homemade 5 axis CNC by webbworks http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3603 webbworks Thu, 16 May 2013 10:42:51 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3603 Very Nice. I would very much appreciate more information about your machine. Plans, Cost and how long to build. Thanks for posting the vid.

]]> Comment on Homemade 5 axis CNC by TurboLS1Goat http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3602 TurboLS1Goat Thu, 16 May 2013 10:26:20 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3602 That is awesome. I can really appreciate the work that went into this. I bet you are sick of hearing it, but could I also get the same information on your amazing CNC? Thanks!

]]> Comment on Homemade 5 axis CNC by ElementHTTP http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3601 ElementHTTP Thu, 16 May 2013 10:05:40 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3601 Sexy machine you got there :D

]]> Comment on Homemade 5 axis CNC by damian duff http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3600 damian duff Thu, 16 May 2013 09:30:53 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3600 Hi, Great machine love the work im current about to start trying to make myself one similar for mold making purposes i have a 2 rc hobby shops with a small 3 axis one currently but want to make a 5 axis which spindal/head is that or any parts/plans/information would be much appreciated you must have tons of them great work Cheers and maybe you like something from my shop

]]> Comment on Homemade 5 axis CNC by Ken Ross http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3599 Ken Ross Thu, 16 May 2013 08:45:25 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3599 I am interested in plans as well…

]]> Comment on Homemade 5 axis CNC by martymuseman http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3598 martymuseman Thu, 16 May 2013 08:22:13 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3598 Amazing machine! Great work here. I saw lots of people ask about plans. I would also like that information. But maybe if you have the machine and I need to mill large foam blocks you can do it for a fee? I’m looking to make fiberglass molds, or even fiberglass parts. Don’t know whether it would be worth shipping from Poland if you are interested. Let me know! Thanks!

]]> Comment on Homemade 5 axis CNC by Mark O. Brown http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3597 Mark O. Brown Thu, 16 May 2013 08:13:40 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3597 Are plans available for your machine??

]]> Comment on Homemade 5 axis CNC by KT3102E http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3596 KT3102E Thu, 16 May 2013 07:34:40 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3596 So u will made so differense and hard machine, but u can`t have good camera(

]]> Comment on Homemade 5 axis CNC by Mike R http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3595 Mike R Thu, 16 May 2013 07:12:58 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3595 Awesome. Excellent work and nice build. Well done.

]]> Comment on Homemade 5 axis CNC by DimensionMachine http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3594 DimensionMachine Thu, 16 May 2013 07:01:46 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3594 Awesome work..very impressed and you made me smile!!

]]> Comment on Homemade 5 axis CNC by bagalac http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3593 bagalac Thu, 16 May 2013 06:07:44 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3593 What is the Max piece this machine can make? do you rent machine time on it?

]]> Comment on Homemade 5 axis CNC by MidShipCivic http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/comment-page-1/#comment-3592 MidShipCivic Thu, 16 May 2013 05:16:19 +0000 http://cncinformation.com/CNC-Router/homemade-5-axis-cnc/#comment-3592 I want to make a 5 axis too but not sure if I should make the frame in Steel or aluminum what made you choose steel?

]]> Comment on Homemade CNC Router by Andreza Silva http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3591 Andreza Silva Wed, 15 May 2013 01:32:45 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3591 Nice video…wondering how much you spent to build it?

]]> Comment on Homemade CNC Router by Eincis http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3590 Eincis Wed, 15 May 2013 00:37:57 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3590 Is there are nema motors?

]]> Comment on Homemade CNC Router by TheDIMONART http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3589 TheDIMONART Tue, 14 May 2013 23:55:42 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3589 Of course!! It`s NEMA 17 size..NEMA is not a brand name- it`s just a size standart for all stepper motor manufacturers. NEMA 17 is most cheap and low current motors. NEMA 23- for serious applications. NEMA 34 and NEMA 43- is most powerfull, high current and high torque motors, for industrial cnc routers!!

]]> Comment on Homemade CNC Router by gervac14 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3588 gervac14 Tue, 14 May 2013 23:27:23 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3588 what type of material do you use on the frame?

]]> Comment on Homemade CNC Router by jose ilescas http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3587 jose ilescas Tue, 14 May 2013 23:20:03 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3587 Thank You! we spend around $500 dlls

]]> Comment on Homemade CNC Router by jose ilescas http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3586 jose ilescas Tue, 14 May 2013 23:19:23 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3586 Hi gervac14 for  frame we use 1″ x 3″ Steel Structural Rectangle ,

]]> Comment on Homemade CNC Router by jose ilescas http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3585 jose ilescas Tue, 14 May 2013 22:53:28 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3585 $200 nema motors $300 materials

]]> Comment on Homemade CNC Router by dmx5122 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3584 dmx5122 Tue, 14 May 2013 22:35:33 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3584 What is the programme and electronics ti mve the motors ?

]]> Comment on Homemade CNC Router by jose ilescas http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3583 jose ilescas Tue, 14 May 2013 21:51:32 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3583 Hi dmx5122 we use Mach3 & V-Carve software

]]> Comment on Homemade CNC Router by Tundemats1 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3582 Tundemats1 Tue, 14 May 2013 21:19:58 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3582 I really like this machine. If im ready to pay, is there anyway you can build one for me?

]]> Comment on Homemade CNC Router by Ignacio Barriga Nuñez http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3581 Ignacio Barriga Nuñez Tue, 14 May 2013 20:49:30 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3581 Como puedo conseguir los planos y lista de material, ademas de el Software?

]]> Comment on Homemade CNC Router by cncthings http://cncinformation.com/CNC-Router/homemade-cnc-router-6/comment-page-1/#comment-3580 cncthings Tue, 14 May 2013 20:17:20 +0000 http://cncinformation.com/CNC-Router/homemade-cnc-router-6/#comment-3580 are those cncrouterparts rail blocks?

]]> Comment on PreciseCam CNC Router – print-die manufacturing by AETCNC http://cncinformation.com/CNC-Router/precisecam-cnc-router-print-die-manufacturing/comment-page-1/#comment-3579 AETCNC Mon, 13 May 2013 11:26:43 +0000 http://cncinformation.com/CNC-Router/precisecam-cnc-router-print-die-manufacturing/#comment-3579 What is your repeatable accuracy like? And also your axial cutting force? Is there enough torque in the stepper motor to get the bit through mild steel/aluminum? Looks good, well done.

]]> Comment on PreciseCam CNC Router – print-die manufacturing by simplycnc http://cncinformation.com/CNC-Router/precisecam-cnc-router-print-die-manufacturing/comment-page-1/#comment-3578 simplycnc Mon, 13 May 2013 11:13:02 +0000 http://cncinformation.com/CNC-Router/precisecam-cnc-router-print-die-manufacturing/#comment-3578 hiya,apologies for late reply…this has been used to cut aluminium,cant remember the grade but it was the hard stuff.steel ive cut thin mild steel but was never built for that to be fair.
repeatable accuracy I don’t have any measurements to back it up,but the person who purchased from me emailed and said he’s well happy and is just as accurate as the one uses at work…

]]> Comment on Fresadora CNC Router Hobby by Assimquant C http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/comment-page-1/#comment-3577 Assimquant C Fri, 10 May 2013 22:54:55 +0000 http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/#comment-3577 Wow good job. I can see the base is quite level. Mine is way off…. :/ I probably have to redo mine in the future.

]]> Comment on Fresadora CNC Router Hobby by Dave Robbie http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/comment-page-1/#comment-3576 Dave Robbie Fri, 10 May 2013 22:29:44 +0000 http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/#comment-3576 Thanks.

]]> Comment on Fresadora CNC Router Hobby by Assimquant C http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/comment-page-1/#comment-3575 Assimquant C Fri, 10 May 2013 21:32:35 +0000 http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/#comment-3575 How did you align the X rails tho? (the base rail) Its very hard for me, it is why mine is non-level.

Also did you use wood glue for every joint?

]]> Comment on Fresadora CNC Router Hobby by Dave Robbie http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/comment-page-1/#comment-3574 Dave Robbie Fri, 10 May 2013 21:30:54 +0000 http://cncinformation.com/CNC-Router/fresadora-cnc-router-hobby/#comment-3574 I just followed the Solsylva instructions exactly. I did use yellow wood glue along with the screws. I would suggest remaking the part that is a problem. Go back to the instruction for that part and follow to the letter. The instructions are excellent which I was able to prove out.

]]> Comment on CORTE COM FACA OSCILANTE EVA 32mm CNC ROUTER CNC SCRIBA VITOR CIOLA by Fabiano Haag http://cncinformation.com/CNC-Router/corte-com-faca-oscilante-eva-32mm-cnc-router-cnc-scriba-vitor-ciola/comment-page-1/#comment-3573 Fabiano Haag Fri, 10 May 2013 15:46:10 +0000 http://cncinformation.com/CNC-Router/corte-com-faca-oscilante-eva-32mm-cnc-router-cnc-scriba-vitor-ciola/#comment-3573 Boa noite! Gostaria muito de uma máquina dessas, porém de pequeno porte (500 x 500) ou (600 x 400). Para corte de E.V.A. De no máximo 16 mm de espessura. Vcs fazem este tipo de equipamento? Abraços!

]]>