Here are all the CNC Stomp Pad Videos:

Video 1:
CNC Project that is shot in a tutorial sequence. It goes from the Design, CAD, CAM, Control, CNC Plasma Cutting and then final assembly.

Video 2:
In this next video we go over the design of the CNC Stomp Pad. We use Adobe Illustrator to sketch it out.

Video 3:
In this CNC Tutorial Video we go over the design in CAD. We resize it to our dimensions and then convert it into a DXF File.

Video 4:
Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project.

Video 5:
In this video we go through Mach 3 to look over the g-code.

Video 6:
Last video we checked our g-code to make sure our program was correct. Now we go out to the shop and do some work.

Video 7:
When you cut something out with a plasma cutter there is slag left over you have to remove. This slag is officially called "dross" when it come to plasma cutting.

Video 8:
During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and giving it a matte finish.

Video 9:
In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out.

Video 10:
Here is the final video in the CNC Stomp Pad Tutorial Video Series. In this video, we go over the final assembly of the stomp pad. Then we watch as we used double sided tape to adhere it to the snowboard.